Author Topic: How to extract/upload cust  (Read 7474 times)

Offline Neko95

  • Moderator
  • Jr. Member
  • *
  • Posts: 70
  • Dont make things complicated.
    • CAT SOCIETY
  • Firmware: KM555AT_V10k
  • Network: DigiTeL
Re: How to extract/upload cust
« Reply #60 on: October 17, 2011, 01:35:46 pm »
here.. read and study
your mobile phone needs to be re format..

http://www.mylgcookieclubby.smffy.com/index.php?topic=38.0
:3 nine-five

Offline marro

  • Newbie
  • *
  • Posts: 9
    • mx
  • Firmware: v10a
  • Network: Telcel
Re: How to extract/upload cust
« Reply #61 on: October 18, 2011, 12:34:45 am »
Do you know if it is possible to extract cust from a LG KM555G with v10a software???, i tried it several times but it just keep showing "Time out occured during packet reception" after a few seconds of hitting Enter.

I succesfully upgraded to v10k but there was no signal, so i rolled back to v10a.

I just want to try some themes.

Thanks in advance.

Offline sideflip

  • Administrator
  • Hero Member
  • *
  • Posts: 494
Re: How to extract/upload cust
« Reply #62 on: October 18, 2011, 01:12:01 am »
the error is normal.. Look at your lg utils folder, there should be CUST_THEME.big file (132mb approx.)
quit

Offline marro

  • Newbie
  • *
  • Posts: 9
    • mx
  • Firmware: v10a
  • Network: Telcel
Re: How to extract/upload cust
« Reply #63 on: October 18, 2011, 02:10:06 am »
Sorry, i forgot to mention the file was always 0 kb :s

Offline sideflip

  • Administrator
  • Hero Member
  • *
  • Posts: 494
Re: How to extract/upload cust
« Reply #64 on: October 21, 2011, 01:55:57 am »
Sorry, i forgot to mention the file was always 0 kb :s

too bad. try upgrading to another firmware version.
quit

Offline marro

  • Newbie
  • *
  • Posts: 9
    • mx
  • Firmware: v10a
  • Network: Telcel
Re: How to extract/upload cust
« Reply #65 on: October 21, 2011, 05:23:40 am »
Could you recommend any? I tried with v10k but it doesn't work with my operator (TELCEL from M?xico)

Offline wilfredleslie

  • Newbie
  • *
  • Posts: 2
    • Philippines
  • Firmware: v10k_00.kdz
  • Network: TM
Re: How to extract/upload cust
« Reply #66 on: November 02, 2011, 06:51:24 am »
it always says Error during the sec-pack sending: for nand systems an ebl must be injected. none was found...pls help...-_-


Offline sideflip

  • Administrator
  • Hero Member
  • *
  • Posts: 494
Re: How to extract/upload cust
« Reply #67 on: November 03, 2011, 05:40:38 am »
make sure you type every  line correctly and your km555.flb is on the root of your drive c
quit

Offline ryoms

  • Newbie
  • *
  • Posts: 6
    • Phillipines
  • Firmware: V10k
  • Network: Sun
Re: How to extract/upload cust
« Reply #68 on: November 17, 2011, 07:39:09 am »
I have experienced this error before. The error is in the CUST_THEME file. You have to extract CUST from firmware or use other CUST_THEME. I will upload a Blank CUST_THEME tomorrow. Here's what you have to do:

Open your CUST_THEME on winimage
select lgapp folder. Right click on it and select extract.
On the pop-up window click browse and select desktop.
Click "extract with path names"
Extract your files there.
Download the blank CUST_THEME (http://www.mediafire.com/?7ijb03b247cemuo).
Open it on winimage.
Drag and drop your lgapp folder you extracted (on the desktop.)
Save.
Put it on your drive c. and send to your clubby.

its still empty after i downloaded ur CUST_THEME,,, i dont know about what u are talking in "extracting" cuz its empty.............. :(

Offline sideflip

  • Administrator
  • Hero Member
  • *
  • Posts: 494
Re: How to extract/upload cust
« Reply #69 on: November 17, 2011, 08:23:12 am »
Yes! I uploaded an empty cust.
Next thing you should do is to extract files from your old cust (extract with path, you can do it on winimage) and put it in the blank cust that you downloaded. Save It. Send back your new CUST to your phone.
quit

Offline ryoms

  • Newbie
  • *
  • Posts: 6
    • Phillipines
  • Firmware: V10k
  • Network: Sun
Re: How to extract/upload cust
« Reply #70 on: November 17, 2011, 12:16:36 pm »
this is problem kc oh.. this pic is cust from my pc..
then.. i itry ur cust and its empty.. i still dont get it ur "extracting from a path in winimage?? mero ba dun???"
« Last Edit: November 17, 2011, 12:18:53 pm by ryoms »

Offline ryoms

  • Newbie
  • *
  • Posts: 6
    • Phillipines
  • Firmware: V10k
  • Network: Sun
Re: How to extract/upload cust
« Reply #71 on: November 17, 2011, 02:41:40 pm »
oiiiiii.. sideflip.. its ok now.. hahahah.. i know the reason why my cust has empty,hahahhaha... thanks a lot.. i use ur android theme.. thanks......

Offline sideflip

  • Administrator
  • Hero Member
  • *
  • Posts: 494
Re: How to extract/upload cust
« Reply #72 on: November 18, 2011, 06:10:51 am »
oiiiiii.. sideflip.. its ok now.. hahahah.. i know the reason why my cust has empty,hahahhaha... thanks a lot.. i use ur android theme.. thanks......

good for you.
quit

Offline ryoms

  • Newbie
  • *
  • Posts: 6
    • Phillipines
  • Firmware: V10k
  • Network: Sun
Re: How to extract/upload cust
« Reply #73 on: November 18, 2011, 07:35:54 am »
 ....i installed ur android theme.. how come other languages are gone?? why?? how to get those arab, chinese,korean languages back??? I need them... :(
« Last Edit: November 18, 2011, 07:38:29 am by ryoms »

Offline ryoms

  • Newbie
  • *
  • Posts: 6
    • Phillipines
  • Firmware: V10k
  • Network: Sun
Re: How to extract/upload cust
« Reply #74 on: November 18, 2011, 02:00:56 pm »
1 thing also.. when i open my youtube application connecting it with wifi, i cant type anything in the search box and also in the twitter application.. huhuuhh.. :((